|
 The PiMag Optimizer II takes PiMag water to a whole new level of excellence as if it had just cascaded over the rocks and pebbles of a mountain stream.
The PiMag Optimizer II oxygenates the water and improves its bio-availability to the body through reducing the size of clusters of water
molecules. Water quality is further enhanced by circulating it through a
ring of pi-ceramic material and a complex magnetic field.
Rapid water movement in a vortex (cyclone) pattern oxygenates
the water for enhanced performance.
This controlled turbulence is
caused by a rapidly spinning rotor at the base of the Optimizer II
pitcher under the influence of a rotating 3,500 gauss magnet.
This action also passes the water through complex magnetic
fields throughout the optimising cycle.
These magnetic fields
are generated by a pair of revolving 4,400 gauss magnets with
opposing polarity within the motor housing.
The Optimizer II’s digital readout panel measures the optimising cycle
time, and the total number of hours of use to indicate when it is time to
change the Pi Ring.
- Features & Benefits
- Product & Ordering Information
- The Facts
- Hints & Tips
- Warranty Information
- Downloads
Note: This product is free of BPA plastic (Bisphenol A). |
| Patented technology |
Reduces the size of clusters of water molecules to improve the water's bio-availability to the body. |
| Vortex pattern |
Oxygenates the water for enhanced performance |
| Rotor |
Spins rapidly under magnetic power to agitate the water at high speed |
| Optimizer II Pi Ring |
Contains pi-ceramics to help normalise pH and introduce far-infrared energy |
| 2 x 4,400 gauss magnets |
Create a complex magnetic field to energise the water |
| Digital read-out panel |
Sets optimising cycle and measures hours of use to indicate when it is time to
change the Pi Ring |
| Full 2 litre capacity |
Ideal quantity for immediate use or storage |
|
|
1. Vortex
2. Rotor
3. Digital Read-Out Panel
4. Optimizer II Pi Ring
5. Revolving 4,400 gauss Magnets
#1359 PiMag Optimizer II
#1358 PiMag Optimizer II Replacement Ring
Refer to Product Information Guide that comes with unit for important safety and care instructions.
The PiMag Optimizer II has been tested by Testing & Certification Australia and complies with all appropriate Australian
and New Zealand electrical safety standards. Make sure you read all care and safety information contained in the Operating Manual supplied with the PiMag
Optimizer II. Only fill with microbiologically safe drinking water (treated public water supply). Nikken Wellness has no information that the water supply in your area has any water problems implied or referred to in
this brochure or other communication materials. |
|
Electric Power: 230 volts 50/60 Hz 17 W
Dimensions Base: 20 x 14.5 x 33.5 cm
Dimensions Pitcher: 19 x 12.5 x 25.5 cm
Weight: 2.1 kg
Capacity: 2 litres
Optimising Cycle: 9 minutes
|
|
- The PiMag Optimizer II is not a water purifier. That's the job of your PiMag Water Fountain or PiMag Water System.
- The Optimizer II adds oxygen and breaks down the size of water molecules to increase its bio-availabilty to the body.
- Water quality is further enhanced by circulation through a ring of pi-ceramic material and complex magnetic fields.
- A vortex of cyclone pattern created by the product's unique design, oxygenates the water during the optimising cycle for enhanced performance.
- A special rotor sitting at the base of the machine is activated by rotating 3,500 gauss magnet inside the motor housing. This action passes water through complex magnetic fields during the programmed operation.
- The Optimizer II Pi Ring is filled with pi-ceramic materials consisting of calcium carbonate and other minerals to help normalise pH, enhance mineral composition, and introduce far-infrared energy to improved the bio-availability of water
- A pair of strong 4,400 gauss magnets positioned with opposing polarity within the motor housing, revolve rapidly to create a complex magnetic field.
- The PiMag Optimizer II contains a digital read-out panel the measures the nine minute optimising cycle time. It also measures the total number of hours of use to indicate when it is time to change the Pi Ring. The Pi Ring should be changed once a year or after 200 hours of use, whichever comes first.
|
The PiMag Optimizer II is not a water purifier or filter. Best results
are achieved using PiMag water.
Refrigeration of optimized water for up to 48 hours helps preserve
its freshness. It is also suitable to use and store the Optimizer pitcher with the Pi Ring in place in the refrigerator for
convenience.
Never add anything to water in the Optimizer pitcher as this will
affect the Pi Ring. Transfer the optimized water to another container and then add flavourings according to your taste. Popular flavourings include honey, evaporated milk, lemon juice, and green tea. Feel free to experiment.
Nearly any container can be used to store the water, however
metal containers including stainless steel and aluminium are not
recommended. The sturdy PiMag Carry Mate is a handy way to
enjoy refreshing PiMag optimized water whatever the situation - work,
school, gym, while traveling or simply at leisure.
The PiMag Optimizer II is covered by a 12 months warranty from date of purchase against faulty materials and workmanship under normal use. This warranty does not cover misuse, negligent handling, or damage caused by attempted repair, or the Optimizer II Replacement Ring.
|
|
